How To Fix Hal Dll Missing Windows Xp Without Cd

How To: Fix "missing or corrupt system32\hal.dll"

Applies to: Microsoft Windows NT, Windows 2000, Windows XP

Symptoms

When you lot start your computer, you receive an fault message similar to one of the following:

• Windows could not start considering the following file is missing or decadent:
  <windows_root>\System32\hal.dll
  Please re-install a copy of the above file.
• windows_root\System32\hal.dll missing or corrupt:
  Please re-install a copy of the above file.
• Windows could not offset because of a computer disk hardware configuration problem.
  Could not read from the selected kick disk. Check boot path and disk hardware.
  Please bank check the Windows documentation near hardware disk configuration and your hardware reference manuals for additional information.

Cause

This error may occur because the file hal.dll is missing or corrupt, or because the organization configuration has changed and Windows is looking in the wrong place for information technology.

Solution

The easiest way to fix problems with hal.dll is to use Spotmau BootSuite or Spotmau PowerSuite Gilt. However, if your figurer is using Windows XP and you have a Windows XP installation CD you may be able to boot from this and use the Recovery Console to fix the problem manually instead.

Go Spotmau BootSuite at present
and fix this problem in seconds!

Use Spotmau BootSuite

• Insert the Spotmau BootSuite CD and first the computer. The master menu will announced.

• Click 2. Windows Recovery.

• When the Windows Recovery tool starts, click Windows NT/2000/XP/2003.

• On the Windows NT/2000/XP/2003 Recovery dialog, click Recover HAL and Arrangement.

• On the Recover HAL and System dialog, select your operating system (due east.1000. Windows XP) and then click Recover.

On successful recovery remove the Spotmau PowerTools CD from the drive and click Restart to reboot the computer.

Get Spotmau BootSuite at present
and gear up this problem in seconds!

Using the Windows Recovery Console

The Windows 2000 and Windows XP CDs supplied by Microsoft take a tool called the Recovery Console which tin can exist used to repair errors that prevent Windows XP from starting using the command line. OEM versions of Windows XP, including computers that were supplied with Windows XP preinstalled, may not have this utility, then the post-obit steps may not piece of work:

• Insert the Windows CD and start the reckoner.
• When the Welcome to Setup screen appears, printing R.
• Blazon a number corresponding to the Windows installation you wish to repair (usually ane) and press Enter.
• When prompted, blazon the ambassador password and press Enter.
• At the command prompt, enter the following commands./ (The example commands assume that C: is your Windows drive. Alter the bulldoze alphabetic character if appropriate.)
  ATTRIB -H -R -S C:\BOOT.INI
  DEL C:\BOOT.INI
  BOOTCFG /REBUILD FIXBOOT
• Remove the Windows XP CD from the drive and restart the figurer.

If this does not resolve the problem:

• Repeat the instructions higher up to boot to the recovery console and log on every bit administrator.
• At the command prompt type the following command:
  EXPAND D:\I386\HAL.DL_ C:\WINDOWS\SYSTEM32\HAL.DLL

Prevention

It'south difficult to prevent problems like this from ever occurring only regular and frequent total backups of the system are a proficient precaution that can make recovery quicker and easier.

A tool that will make recovery from this kind of trouble much easier is MagiCure Professional. It works past taking snapshots of the system at regular intervals and allowing you to restore them when a trouble occurs. It runs before Windows loads so you can restore a good working arrangement even if Windows won't start.

Source: http://www.tech-pro.net/howto-fix-hal-dll-missing-corrupt.html

Posted by: feltonbreserand.blogspot.com

Share this post